Eurotech ED-C3 02 Especificações descarregar pdf (Página 53)

BIOS Setup

DPD5MAN101

Setting

Contents

PCH Temp Read Enable

*19

Set PCH temperature read.

・Disabled

・Enabled (Default)

PCH Temp Read Enable

*19

Set PCH temperature read.

・Disabled

・Enabled (Default)

CPU Energy Read Enable

*19

Set CPU energy read.

・Disabled

・Enabled (Default)

CPU Temp Read Enable

*19

Set CPU temperature read.

・Disabled

・Enabled (Default)

CPU2 Temp Read Enable

*19

Set CPU 2 temperature read.

・Disabled

・Enabled (Default)

TS On DIMM Enable

*19

Set DIMM temperature read.

・Disabled (Default)

・Enabled

Alert Enable Lock

*19

Set lock all alert activation.

・Disabled (Default)

・Enabled

ME SMBus Thermal Reporting

Set SMBus thermal reporting.

・Disabled (Default)

・Enabled

*19: possible to set by changing Thermal Sensor Device Enable to “Enable”

8.2.14. ICC Configuration

8.2.14.1. DIV-2S

A setup of the clock for BCLK, DMI, PEG, PCIe, PCI33, SATA, and USB3.

Table 47. DIV-2S Setting

Setting

Contents

New frequency[10KHz]

Set frequency in unit of 10KHz.The frequency value will be

rounded automatically to closest valid value. Accepted range

is limited by maximum/minimum frequency. The change is not

applicable until “Apply setting” is executed.

・Preset value：3850(3.85KHz)～40000(40KHz)

・Default：10000(10KHz)

New SSC mode

Spread spectrum clock mode. Set how to spread spectrum

from base clock. The change is not applicable until “Apply

setting” is executed.

・Up

・Center

・Down (Default)

New SSC spread percent[0.01%]

Set clock spread spectrum at 0.01%.Set spectrum deviation

from base clock. Possible range is limited at max supported

SSC%. The change is not applicable until “Apply setting” is

executed.

・Preset value：0～50(0.5%)

・Default：0

1 2 ... 48 49 50 51 52 53 54 55 56 57 58

Comentários a estes Manuais

Sem comentários

Eurotech ED-C3 02 Especificações Página 53

Comentários a estes Manuais