Eurotech BRI ISDN Manual do Utilizador descarregar pdf (Página 40)

Am186™CC Microcontroller Router Reference Design User’s Manual

2-14

Flash Memory

NOTE: See sheet 4 in the schematics for the Flash memory circuitry.

A single, surface-mount, TSOP Am29F800, 55-ns, 8-Mbit Flash memory device

allows for zero wait state operation at 50 MHz.

The Am29F800 Flash memory CE

is connected to chip select UCS and mapped

to address range 0x80000-0xFFFFFh. This is 4 megabits of addressable memory

that only allows access to one-half of the Am29F800 device. The high-order

address bit of the Am29F800 device, A18, is connected to PIO35. This allows bank

selecting between the upper and lower halves of the 8 megabit Flash memory

device. PIO35 defaults to a logic High using a 10K-Ω pullup resistor. PIO35 can

be driven low to enable access to the lower half of the Flash memory device. The

Am29F400 device can be used as a direct replacement for the Am29F800 device.

A18 connects to pin 16 of the Am29F400 Flash device. Pin 16 is a true no connect

on this device and bank selecting is not available.

about.book Page 14 Wednesday, July 21, 1999 11:10 AM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 99 100

Sem comentários

Eurotech BRI ISDN Manual do Utilizador Página 40