Eurotech APOLLO 1U ICE Manual do Utilizador Página 1

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 1 of 16 MRO Delay Line ICD Metrology System to Beam Combining Facil

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 10 of 16 INNER BCA DELAY LINES OUTER BCA METROLOGY BENCH N SOUTH W

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 11 of 16 Figure 2 Position of the top surface of the metrology tab

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 12 of 16 Figure 3 The Agilent cable arrangement for laser head, po

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 13 of 16 Figure 4 The Agilent 10881C Laser head cable. 13

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 14 of 16 Figure 5 Specification sheet for the Agilent 5517FL laser

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 15 of 16 Figure 7 Specification sheet for the Agilent 5517GL laser

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 16 of 16 Figure 8 Extract from Agilent Laser System User Manual 1

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 2 of 16 1 ICD Description ICD Number Sub-systems Org Owner Br

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 3 of 16 Table of Contents 1 ICD Description...

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 4 of 16 6 Applicable Documents DOCUMENTS AD1 Top Level Requirem

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 5 of 16 9 Requirements 9.1 Metrology Table 9.1.1 Metrology

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 6 of 16 Table 1 Electronics in the rack positioned in the outer BCA

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 7 of 16 9.4 Services The following services are required for the

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 8 of 16 is supplied via the measurement board to which they connect

Metrology System to Beam Combining Facility ICD INT-406-VEN-0012 v0.4.doc Page 9 of 16 10.3 Laser cooling To prevent uncontrolled air exchange